BERK CYCLING SHOES
Berk cycling shoes prioritize comfort and lightness, using breathable materials that adapt to the foot while offering robust support where needed. The carbon sole ensures efficient power transfer, providing a direct connection between the foot and the pedal for maximum performance.
SPECIFICATIONS
- Available sizes: 38 – 46 (EU)
- Weight: 220 g (Size 43 EU)
- Finish: Black and White leather
- Warranty: 2 years
Delivery starts end of October 2024.
BERK CARBON SADDLES
All saddles are available in multiple colors.
FOOT MEASUREMENT GUIDE
To measure the length and width of your feet accurately, follow these steps:
Measuring Foot Length:
- Prepare a Piece of Paper: Place a piece of paper larger than your foot on a flat surface.
- Trace Your Foot: Stand on the paper with your full weight distributed evenly. Use a pencil to trace the outline of your foot. Ensure the pencil stays vertical to get an accurate trace.
- Identify the Longest Points: Mark the most extended point at the toe (usually the tip of the big toe or second toe) and the most extended point at the heel.
- Measure the Length: Use a ruler or measuring tape to measure the distance between the two marks (toe to heel). Repeat for both the left and right foot.
Measuring Foot Width:
- Identify the Widest Points: While standing or after tracing your foot, locate the most extended points on the inside and outside sides of the foot at the metatarsal area (the ball of the foot, near the base of the toes).
- Measure the Width: Use a ruler or measuring tape to measure the distance between these two points. Again, do this for both the left and right foot.
Tips for Accurate Measurements:
- Take Measurements at the End of the Day: Feet tend to swell throughout the day, so measuring in the evening will give a more accurate representation of their size.
- Wear Socks: If you plan to wear socks with the shoes you’re measuring for, wear them during measurement.
- Repeat for Both Feet: As feet can be different sizes, measure both feet and use the larger measurement for shoe sizing.
- If you follow these steps, you’ll be able to get precise measurements of both the length and width of your left and right feet.
SIZE GUIDE
| FOOT LENGTH (mm) | 240 | 247 | 253,5 | 260 | 267 | 273,5 | 280 | 287 | 293,5 |
| FOOT WIDTH (mm) | <95 | <97 | <99 | <101 | <103 | <105 | <107 | <109 | <111 |
| EU | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 |
| UK | 5 | 5,5 | 6,5 | 7,5 | 8 | 9 | 9,5 | 10,5 | 11,5 |
| US MEN | 5,5 | 6 | 7 | 8 | 8,5 | 9,5 | 10 | 11 | 12 |
ADVICE FOR USE AND CARE OF BERK® PRODUCTS
Berk® products are crafted from the highest quality materials available. To ensure the longevity and performance of your shoes, please follow these care instructions:
General Care
Handle with Care: Treat your shoes gently and with respect.
Cleaning
Remove dirt and mud using a soft, moist cloth or brush and clean water.
Avoid using chemical cleaning agents.
Never clean your shoes in a washing machine.
Leather Care
Regular Cleaning: Clean your shoes regularly following the above cleaning instructions to maintain the quality of the leather.
Lining Care
Periodic Cleaning: Clean the lining periodically to prevent odor build-up and to extend the shoe’s lifespan.
Insole Care
Keep Insoles Clean: Ensure the cushioned insoles are free of dirt and mud to prevent bacteria build-up and premature aging.
High Abrasion Areas
Appearance Changes: High abrasion areas may change in appearance over time but this will not affect the shoe’s performance or properties.
Drying Instructions
Dry at Room Temperature: Dry shoes at room temperature without using direct external heat sources, including the sun.
Drying Procedure
- Stuff the shoe completely with newsprint, slightly reshape the shoe from the outside by hand, and tie the laces lightly.
- Place the shoes a safe distance from a mild source of warmth but ensure they are not in direct contact with any heat source.
- After one hour, remove the wet newsprint and repeat the process until the shoes are completely dry.
- Avoid pressing the shoe tip with hard objects to prevent damage to the thermo reinforcement material at the tip.
By following these guidelines, you can ensure that your Berk® products remain in optimal condition for as long as possible.
GET IN TOUCH WITH US
Contact us for advice, question, seat testing or just to say hello.
